ADLINK PCI-8124-C - Manual (Page 57)

TriggerMaster Utility 47
5.3.5 Set_TRG_&_TTL_Out Form
In this form, you can set operation logic, operation mode, source,
and En/Disable options for TRG-OUT and TLL-OUT.
1. Set TRG_# source and mode: Set En/Disable and
operation logic for the TRG-OUT. The related function is
_8124_set_trgOut_logic
.
2. Select PWM source for TRG_#: Select the PWM
source for TRG-OUT. The related function is
_8124_set_trigger_source
.
3. Set TTL_# Mode: Set the TTL-OUT mode to be general
output or be TRG-OUT. The related function is
_8124_set_ttlOut_source
.
2
3
1