ADLINK PCI-8124-C - Manual (Page 63)

TriggerMaster Utility 53
 FIFO_# Empty: Set the FIFO_# empty event to the inter-
rupt factor. This interrupt event occurs when the FIFO is
empty.
 FIFO_# Full: Set the FIFO_# full event to the interrupt
factor. This interrupt event occurs when FIFO is full.
 LTC_#: Set the LTC_# event to the interrupt factor. This
interrupt event occurs when specified latch contition
meet.
 TTL_IN_#: Set the TTL_IN_# event to the interrupt fac-
tor. This interrupt event occurs when TTL_IN_# receives
a signal.
2. For all channel: Set the linear comparator event to the
interrupt factor. This interrupt event occurs when the
comparing in linear comparator is finished.