9 encoder_# mode, Encoder_# mode – ADLINK PCI-8124-C User Manual
Page 61
TriggerMaster Utility
51
5.3.9
Encoder_# Mode
Enter Set mode and logic tab by clicking the Set mode and logic
tag as show below:
1. Encoder_# Mode: Set the encoding mode for encoder
including OUT/DIR, CW/CCW, 1xAB phase, 2xAB phase
and 4xAb phase. The related function is
_8124_set_encoder_input_mode
.
2. CNT_# Mode: Set the count mode counting up or count-
ing down for counter. The related function is
_8124_set_encoder_up_down_count
.
3. EZ_# Clear: En/Disable the EZ clear function. The
related function is _8124_set_ez_clear.
4. Set PWM_#: Set the PWM mode and its width. The
related functions are _8124_set_pwm_mode and
_8124_set_pwm_pulse_width
.
5. Set Interrupt Source: Click the Enter button to display
the Set_Interrupt_Source form. In the form, user can set
various interrupts for each channel and linear compara-
tor interrupt for all channels.
6. FIFO_# Low Level: Set the FIFO comparator low level.
The related function is _8124_set_fifo_level.
1
2
3
4
5
6