10 set_interrupt_source form, Set_interrupt_source form – ADLINK PCI-8124-C User Manual
Page 62
Advertising
52
TriggerMaster Utility
5.3.10 Set_Interrupt_Source Form
In this form, you can set the various interrupt events for each
channel and linear comparator interrupt event for all channels.
1. Only for Channel_#: Set the various interrupt events for
channel_#. The related function is
_8124_set_int_factor
.
PWM_#: Set the PWM event to the interrupt factor. This
interrupt event occurs when the PWM receives a trigger
single.
FIFO_# Level: Set the FIFO_# level event to the inter-
rupt factor. This interrupt event occurs when the data in
FIFO is less than FIFO level.
1
2
Advertising