ADLINK PCI-8124-C - Manual (Page 83)

Function Library 73
6.7 FIFO Comparing
@ Name
@ Description
_8124_reset_fifo:
This function is used to reset (clear) the FIFO. The FIFO status
is return “Empty” status, when you issue this function.
_8124_get_fifo_sts:
This function is used to get the current FIFO status. There are
four status this function would return. The value meaning is as
below figure.
_8124_reset_fifo Reset FIFO data
_8124_get_fifo_sts Get the current FIFO status
_8124_set_fifo_data Set a comparing data to FIFO
_8124_set_fifo_array Set comparing data array to FIFO
_8124_set_fifo_shift Shift the FIFO data to comparator
_8124_set_fifo_level Set the FIFO low level
_8124_get_fifo_level Get the FIFO low level