ADLINK PCI-8124-C - Manual (Page 25)

Signal Connections 15
3 Signal Connections
Signal connections of all I/O’s are described in this chapter. Refer
to the contents of this chapter before wiring any cables between
the PCI-8124-C and the end device.
This chapter contains the following sections:
Section 3.1 Connector (CN1) Pin Definition
Section 3.2 Isolated Input Ports (LTC, INCOM)
Section 3.3 Isolated Encoder Differential Input
Section 3.4 Isolated Output Ports (TRG, EGND)
Section 3.5 TTL Input Ports
Section 3.6 TTL Output Ports