ADLINK PCI-8124-C - Manual (Page 64)

54 TriggerMaster Utility
5.3.11 Set_Interrupt_Source form
Enter Operation tab by clicking the Operation tag show as below:
1. Interrupt parameters:
 Time Out (ms): Set the time out for waiting interrupt.
 WaitBitNo: Input the bit number which user want to wait
the interrupt.
 Wait_INT: Start to wait interrupt. The related function is
_8124_wait_single_int
.
2. FCMP_# Input Single Data:
 Input single one data into FIFO comparator.
3. Interrupt Status-Channel_#: Show the status of inter-
rupt of each channel; color yellow means waiting, color
green means received interrupt, color green means time
out.
4. Interrupt Status – LCMP: Show the status of interrupt
for linear comparator interrupt; color yellow means wait-
ing, color green means received interrupt, color green
means time out.
1
2 3
4
51