2 standards and interface, Standards and interface – ADLINK aTCA-6155 User Manual

Page 20

Advertising
background image

6

Specifications

2.2

Standards and Interface

Standards

• PICMG 3.0 R2.0 AdvancedTCA
• PICMG 3.1 AdvancedTCA Ethernet option 1/9

Networking

• Three dual-port Intel® 82576EB Gigabit Ethernet

controllers

• Four 10/100/1000BASE-T ports (2 on face plate and

2 on Base Interface channels 1-2)

• Two SerDes ports on Zone 3 to RTM
• Dual 10GBASE-KX4 Fabric Interface Channels via

Intel® 82599EB on aDB-6100 riser card

Serial ATA

• Five Serial ATA II ports from ICH10R, one onboard,

four to RTM

Serial Attached
SCSI

• Four SAS ports from LSISAS1064E, one to AMC, three to

RTM

Display

• ATI ES1000 graphics controller with 2D accelerator
• DDR2-533 64MB memory
• Analog RGB up to 1600x1200@75Hz refresh rate

USB

• Three USB 2.0 ports on front panel, four ports to RTM

Serial

• One RJ-45 RS-232 port

Storage

• On-board 4GB USB NAND Flash
• AMC.3 SAS
• Four SATA and three SAS ports on RTM

Front Panel I/O • 1x VGA port (DB-15)

• 3x USB 2.0 port (Type-A)
• 1x RS-232 port (RJ45)
• 2x GbE ports (RJ45)
• 1x AMC bay (aTCA-6155A only)
• LEDs: OOS, Media, User and Hotswap
• Recessed reset button

Rear I/O

• PCI-E x4 from Intel 5520
• 1x COM port
• 4x USB 2.0 ports
• 4x SATA ports from ICH10R
• 3x SAS/SATA ports from LSISAS1064E
• 2x SerDes ports

Advertising