ADLINK aTCA-6155 - Manual (Page 58)

44 Hardware Platform Management
2. Execute upgrade.bat. This tool will upgrade the IPMC
firmware automatically. After the firmware has been
upgraded successfully, please do a power cycle or
remove the blade from the chassis and reinsert.
C:\IPMC\AT6155\UPGRADE>upgrade.bat
C:\IPMC\AT6155\UPGRADE>CWSDPMI.EXE -s-
CWSDPMI V0.90+ (r4) Copyright (C) 1997 CW Sandmann
ABSOLUTELY NO WARRANTY
C:\IPMC\AT6155\UPGRADE>hpmdos.exe -I KCS -F A203.img
upgrade
Adlink HPH.1 DOS Upgrade Agent
Update HPM.1 components using PICMG HPM.1 file
Validating firmware image integrity...OK
Performing preparation stage...OK
Services may be affected during upgrade. Do you wish
to continue? y/n
Target Product ID : 6155
Target Manufacturer ID: 005f13
Performing upgrade stage: Upgrading H8S-AMCc F/W
with Version: Major: 1
Minor: 51
Aux : a2 00 00 03
Writing firmware: 100 % completed
Firmware upgrade procedure successful
Upgrade successful, please shutdown and boot system
HPM.1 upgrade succeed!!
3. Go to the \TESTTOOL directory and execute TEST.BAT.
This tool will list all the sensors on the aTCA-6155, and
“Auxiliary Firmware Revision Information: a2000003”
indicates the firmware version is a2000003.
C:\IPMC\AT6155\TESTTOOL>dir/w
Volume in drive C has no label
Volume Serial Number is 0065-1CB9
Directory of C:\IPMC\AT6155\TESTTOOL
[.] [..] INFO.INI IPMITEST.EXE TEST.BAT