ADLINK aTCA-6155 - Manual (Page 50)

36 Hardware Platform Management
4.2.4 Version Change Sensor
Table 4-5: Version Change Sensor
Sensor
Type
Sensor
Type Code
Sensor
Specific Offset
Event
Version
Change
2Bh
00h
00h Hardware change detected with
associated Entity. Informational. This offset
does not imply whether the hardware change
was successful or not. Only that a change
occurred.
01h
01h Firmware or software change detected
with associated Entity.Informational. Success
or failure not implied.
02h
02h Hardware incompatibility detected with
associated Entity.
03h
03h Firmware or software incompatibility
detected with associated Entity.
04h
04h Entity is of an invalid or unsupported
hardware version.
05h
05h Entity contains an invalid or unsupported
firmware or software version.
06h
06h Hardware Change detected with
associated Entity was successful.
(deassertion event means unsuccessful’).
07h
07h Software or F/W Change detected with
associated Entity was successful.
(deassertion event means ‘unsuccessful’)
Event data 2 can be used for additional event
information on the type of version change -
see definition below