ADLINK aTCA-6155 - Manual (Page 55)

Hardware Platform Management 41
aTCA-6155
Table 4-7 (cont’d): Supported IPMI Commands
KCS IPMB0
Sensor Device Commands
Get Device SDR Info x x
Get Device SDR x x
Reserve Device SDR
Repository
x x
Get Sensor Reading Factors x x
Set Sensor Hysteresis x x
Get Sensor Hysteresis x x
Set Sensor Threshold x x
Get Sensor Threshold x x
Set Sensor Event Enable x x
Get Sensor Event Enable x x
Rearm Sensor Events x x
Get Sensor Event Status x x
Get Sensor Reading x x
FRU Device Commands
Get FRU Inventory Area Info x x
Read FRU Data x x
Write FRU Data x x
PICMG Commands
HPM.1 Upgrade Commands (HPM.1)
Get target upgrade capabilities x x
Get component properties x x
Abort Firmware Upgrade x x
Initiate upgrade action x x
Upload firmware block x x
Finish firmware upload x x
Get upgrade status x x
Activate firmware x x
Query Self-test Results x x
Query Rollback status x x
Initiate Manual Rollback x x