ADLINK aTCA-6155 - Manual (Page 4)

iv Preface
Using this Manual
Audience and Scope
The aTCA-6155 User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating ATCA systems.
Manual Organization
This manual is organized as follows:
Chapter 1, Introduction: Introduces the aTCA-6155, its features,
block diagrams, and package contents.
Chapter 2, Specifications: Presents detailed specification infor-
mation, power consumption, and board layout drawings.
Chapter 3, Functional Description: Describes the aTCA-6155’s
functional components and board interfaces.
Chapter 4, Hardware Platform Management: Describes the
hardware platform management system, including IPMI sensors,
commands, and firmware upgrade procedure.
Chapter 5, Getting Started: Describes the installation of compo-
nents to the aTCA-6155.
Chapter 6, Driver Installation: Provides information on how to
install the aTCA-6155 device drivers.
Chapter 7, Watchdog Timer: Describes the watchdog functional-
ity of the aTCA-6155.
Chapter 8, BIOS Setup: Describes basic navigation for the
AMIBIOS®8 BIOS setup utility.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.