ADLINK aTCA-6155 - Manual (Page 54)

40 Hardware Platform Management
4.3 IPMI Commands
Following table presents all the commands which are supported
by the aTCA-6155 in different interfaces and compatible with IPMI
v1.5 and PICMG 3.0 R2.0 ECN001. There are two interfaces
implemented with IPMI command support.
(1) KCS: OpenIPMI
(2) IPMB0: IPMBa & IPMBb
Table 4-7: Supported IPMI Commands
KCS IPMB0
IPMI Commands
IPM Device “Global” Commands
Get Device ID x x
Cold Reset x x
Warm Reset x x
Get Self Test Results x x
Get Device GUID x x
IPMI Messaging Support Commands
Set BMC Global Enables x x
Get BMC Global Enables x x
Clear Message Flags x x
Get Message Flags x x
Get Message x x
Send Message x x
Master Write-Read x x
BMC Watchdog Timer
Reset Watchdog Timer x x
Set Watchdog Timer x x
Get Watchdog Timer x x
Event Commands
Set Event Receiver x x
Get Event Receiver x x
Platform Event x x