ADLINK aTCA-6155 - Manual (Page 30)

16 Functional Description
ATI ES1000 Graphics Controller
The aTCA-6155 provides an analog VGA port on the front panel
powered by an AMD ES1000 2D graphics controller with the fol-
lowing features:
X 32-bit PCI bus (Rev 2.2), 3.3 V with bus mastering support
X Support for SPI Serial and Flash Memory video BIOS
X One CRT controller capable of supporting two identical
simultaneous display paths
X Dual integrated DACs for CRT display support
X Support for external TMDS transmitter via 24-bit digital out-
put to drive most popular TMDS transmitters up to 165MHz
frequency
X Independent DDC lines for both DACs and TMDS connec-
tions; also full AppleSense support on DAC connection
X Static and dynamic Power Management support (APM as
well as ACPI) with full VESA DPMS and Energy Star com-
pliance
X Comprehensive testability including full internal scan, mem-
ory BIST, I/O xor tree and Iddq
X Full ACPI 1.0b, OnNow, and IAPC (Instantly Available PC)
power management, including PCI power management reg-
isters
X Bi-endian support for compliance on a variety of processor
platforms
X Bus mastering of 2D display lists
X Triple 10-bit palette DAC supports pixel rates to 350MHz
X DDC1 and DDC2 for plug and play monitors
X Flexible memory support:
Z DDR1 and DDR2 SDRAM and SGRAM
Z 16-bit interface
Z 8MB to 256MB
X Up to 1GB/s bandwidth.
X Single chip solution in 0.13 micron process, 1.2V CMOS
technology in a BGA package