ADLINK aTCA-6155 - Manual (Page 85)

BIOS Setup 71
aTCA-6155
8.3.2 Super IO Configuration
You can use this screen to select options for the Super IO settings.
Use the up and down < Arrow > keys to select an item. Use the <
+ > and < - > keys to change the value of the selected option. The
settings are described on the following pages. The screen is
shown below.
UART1 to Front Panel, UART2 to IPMC, UART3 to ZONE2,
UART4 to Telecom, UART6 to IPMC
These items are for enabling/disabling the serial port to the
Front Panel, IPMC, RTM, and Telecom. Detailed resources for
these serial ports are listed in the help field of the setup screen.