ADLINK aTCA-6155 - Manual (Page 36)

22 Functional Description
VGA Analog Interface
The DB-15 female connector CN10 is for analog display output.
DB-15 VGA Connector (CN10)
Table 3-2: VGA Connector Pin Definition
Gigabit Ethernet
The aTCA-6155 is equipped with three dual-port Intel® 82571EB
Gigabit Ethernet controllers, which provide a total of six GbE ports
onboard. In default configuration, two ports are connected to the
front panel and two ports are connected to the Base Interface
channels. The third controller provides two 1GB Fiber Channels
(routed to SERDES links to the RTM if no riser card installed).
The aDB-6155-A Fabric riser card provides the capability to sup-
port different configurations for Fabric Channels 1 and 2. An
aDB-6155-A will be installed on the aTCA-6155 by default. An
Intel 82599EB Ethernet controller on the riser card connects to the
IOH via a PCI-E x8 interface and provides 10GbE links to Fabric
Channels 1 and 2 (FCH1/FCH2).
Signal Name Pin # Pin # Signal Name
Red 1 9 +5 V
Green 2 10 Ground
Blue 3 11 NC
NC 4 12 DDC_DATA
Ground 5 13 HSYNC
Ground 6 14 VSYNC
Ground 7 15 DDC CLK
Ground 8