Intellisense, Manual – Bimba IntelliSens User Manual
Page 16
IntelliSense
®
Manual
16
Data Gateway Network Settings
The Data Gateway is a TCP/IP v4 device and following network settings can be made to enable communication:
Global Server Settings
Figure 37: Global network settings
Web Port:
This defines the TCP port for connecting to IntelliSense
®
. Unless needed, keep the
default
value.
Base URL:
For reference, gives the full URL including port number, to access the current server.
Save:
All changes must be saved to become effective.
Wired Ethernet
The following settings are for the wired RJ-45 Ethernet port on the Data Gateway. Press the save button to make the
changes effective.
DHCP:
Configures the Gatway to receive TCP/IP settings from a DHCP server.
Static:
Allows the user to manually enter the TCP/IP address, subnet mask, gateway and DNS
servers.
The data gateway has a default parameters of:
IP address: 10.10.10.20
Subnet Mask: 255.255.255.0
IP Settings:
When in DHCP mode, displays the assigned parameters. In static mode, values can be
entered
here.