Bimba IntelliSens - Manual (Page 22)

IntelliSense ® Manual
22
DIN Rail Mount - included with the SIM are clips for mounting to 35mm DIN rail. The clips attach to the rear
of the SIM back plate with the included #6 screws. When the screws are tightened down, the clips will grip
onto the flanges of the DIN rail. The SIM may still side laterally on the rail even when screws are tightened.
Figure 7: SIM DIN Rail Mount
Configuring the SIM
An IntelliSense ® SIM can be configured either through a PC or an IntelliSense ® Data Gateway.
To configure IntelliSense ® using a PC, you must first install the IntelliSense ® PC Software.
PC Software Installation
Download the installation executable to a location on your computer and run. Accept the pop-up windows for Win-
dows User Access Control and follow the instructions for selecting the installation location, if the default needs to be
changed. The software will copy all files and install. When installation is complete, the following window will appear.
Select Close to exit and then restart your computer.
Figure 8: Installation complete window
Launch the software by running Bimba IntelliSense ® from the start menu under the Bimba folder.
1 2