Bimba IntelliSens - Manual (Page 24)

IntelliSense ® Manual
24
Add or Configure a SIM on the PC or Gateway
Ensuring that the SIM has two sensors connected, with a SIM connected to a gateway using a programming cable or
through a serial hub, the software has to be set up to recognize the SIM. The following steps illustrate how to do this:
1. On a PC, launch the IntelliSense ® software using a web browser connected to the IntelliSense ® Data Gate-
way that the SIM is connected to. The default address is http:\\10.10.20:3000.
2. Select the Configuration button on the left side of the window.
3. Select the “Cylinders” tab in the middle of the top row.
4. Click the “Add New” button to bring up a pop-up window of all SIMs connected to serial ports on the PC or
Gateway that have not been registered in the software.
5. From the dropdown box, select the port address of the serial connection for the SIM that will be registered
on the computer.
6. Press the “Add” button to register the device.
Figure 11: Add new Cylinder