Bimba IntelliSens - Manual (Page 23)

IntelliSense ® Manual
23
Connecting to the SIM
The SIM connects to the USB port of a PC or Data Gateway with the USB programming cable or through a USB se-
rial hub.
Direct connection – Connect the RJ-45 connector of the programming cable (CBL-IS-RU-1.8) to the port
labeled “PC” on the SIM and the other end to a free USB port on the PC or Data Gateway. With everything
powered on, the USB connector will turn a solid green when connected to a properly working SIM and two
sensors.
Figure 9: SIM Direct Connect
Through Serial Hub – Connect the RJ-45 connector of the serial cable (CBL-IS-RD-XX) to the PC port on the
SIM, and the DB9 connector to one of the free ports on the serial (ISH-D04). The hub is then connected to a
free USB port on the PC or data gateway. With the serial hub, it is possible to connect up to four SIMs to a
single USB port.
Figure 10: SIM serial hub connection
To PC or Gateway
To PC or Gateway