Bonaire Touchpad - Manual (Page 19)

M ULTI -A PPLIANCE T OUCH P AD
Ducted Gas Central Heating
To start the program, touch the MODE outline area for the available icons to be displayed. Press PRGM
icon and make solid. The icons will flash 5 more times and program mode will be engaged.
Reviewing Entered Programs
REVIEW is a feature that allows you to first view the current program
settings. Each step remains visible for 3 seconds.
Once the review procedure has started the FINISH icon will be illuminated.
The FINISH icon can be used to stop the REVIEW process.
U SING T HE P ROGRAM M ODE (PGRM)
Activates the 4 program x 7 day / night timer.
To operate the PGRM mode:
Step 1 Turn the Touch Pad on, press and release the
ON/OFF button. If there is only a central
heater HEAT will automatically display in the
Appliance area.
Step 2 Press the MODE outline. The available icons
will flash. Select PGRM.
The icon will become solid and the remaining
icons will flash 5 more times before
disappearing.
The touchpad will now be in program mode with the current program settings being indicated e.g.
time period, mode of operation, period and settings.
Step 3 To exit the PGRM mode you have 2 options.
1.
Turn the unit off using the ON OFF button
2.
Press the MODE area. The available icons will flash. Select a new mode of operation.
P ROGRAM O VERRIDE (PGRM)
When PGRM is selected, the program can be overridden within an event period (1, 2, 3, or 4) without
altering the program setup. There are 2 scenarios for changing the event:
1. When the program event is ON, operating the unit:
The operating parameters can be altered temporarily. Simply adjust the temperature or change the
zone selection (where fitted) at any time.
2. When the program event has the unit turned OFF.
To override the PGRM mode when the unit is scheduled to be OFF, press and hold the PGRM
mode button for 5 seconds until it beeps and then immediately select one of the mode functions
available. The PGRM button will remain illuminated with your new selection.
The event number will now flash, indicating a temporary change to the program. The program will reset
itself once the next timed event has started or if the PRGM in the mode section is turned OFF then ON or if
the touchpad has been turned OFF then ON.
Bonaire Control System
Page 19