Bonaire Touchpad - Manual (Page 26)

M ULTI -A PPLIANCE T OUCH P AD
Dual Cycle – Refrigerated Air Conditioning
• As your activities vary, you may find you need different temperature settings, e.g. a
temperature comfortable for sitting is usually too cool compared to when you’re moving
about.
Step 6 Press the ON/OFF button to switch the Dual Cycle Cooler
OFF.
Step 7 The Touch Pad remembers your SET TEMPERATURE setting
and uses it next time you turn it ON.
ZONES - S ELECTING ZONE 1, 2, 3, OR 4
Selecting ZONE 1, 2, 3, 4 applies with Dual Cycle air conditioning
because the suitable cooling unit will normally achieve effective cooling in
a smaller portion of your home than compared to the gas heating.
The installer will have set your controller to show the zones you have
available.
In homes with more than one zone, at least one zone must be open at all
times.
To set the open or closed status of a ZONE:
Refer to ZONES - Selecting ZONE 1, 2, 3 or 4 options in the Ducted Gas
Central Heating Section.
P ROGRAMMING Y OUR T OUCH P AD
Programming your Touch Pad will provide energy and time savings. Your
heating/cooling system will only operate when you need it, and at your
chosen comfort levels.
Determine your most comfortable settings, program them and let your
Touch Pad Control do the rest automatically.
P ROGRAMMING S EQUENCE
Refer to Programming Sequence in the Ducted Gas Central Heating
Section.
Bonaire Control System
Page 26