Bonaire Touchpad - Manual (Page 53)

M ULTI -A PPLIANCE T OUCH P AD
Controls – Installation / Setup / Commissioning
COMMISSIONING CHECK LIST
G ENERAL
† All equipment ordered by the customer is installed.
† The unit is level and secure.
† The mains and control wiring are complete and the circuit breaker and GPO are turned ON.
† All Controller functions for the appliance operate.
† All electrical or gas connections are to manufacturers specifications and the relevant electrical or gas
standards and codes.
U NIT – D UCTED H EATING
† Electrical polarity of the power outlet is correct.
† Heater is installed away from sources of dust and fumes (i.e. pool chlorine/petrol etc).
† Gas leaks checked for, none present.
† Flue outlet pipe complies with limits given / code and is sealed waterproof.
† Combustion air meets requirements (internal, under floor).
† Fan speed set is correct.
† Burner pressure is correct.
† Mounting pad/platform complies with requirements / codes.
U NIT – D UAL C YCLE R EFRIGERATED A IR C ONDITIONING
† Unit Foundation correct
† All pipe work is welded and vacuumed down.
† Condenser Coil is purged before charging.
† System is charged, all joints checked and pressures set correctly
† Condenser unit is level
† All clearances around the condenser set to manufacturers specifications.
Bonaire Control Systems Page 53