EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 163)

Test Setup - Test Configurator, Timer, and System
Power Blazer 151
MAC/IP/UDP

Source Flooding and Destination Flooding
1
check boxes when
selected (cleared by default) allows generation of frames using
source/destination MAC addresses flooding as follows: The first frame
is transmitted starting with the least significant bits of the
source/destination MAC address covered by the range set to 0; each
subsequent frame is transmitted by incrementing the least significant
bits by 1; when the upper limit of the range is reached, the
source/destination MAC address restarts over with the least significant
bits covered by the range set to 0.

Flood Range
1
is the range of the least significant bits used for the
Source Flooding and/or Destination Flooding: 2 (1 bit), 4 (2 bits),
8 (3 bits), 16 (4 bits)... up to 16777216 (24 bits) (default).
1. Only available with Traffic Gen & Mon when the Network Layer is set to None (see page 149).