EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 559)

Specifications
Power Blazer 547
XFP 10G Ethernet Optical Interface
XFP 10G Ethernet Optical Interface
a. In order not to exceed the maximum receiver power level before damage, an attenuator must be used.
b. External adapters can be used for other types of connectors.
Transceiver type 10GBASE-SR/SW 10GBASE-LR/LW 10GBASE-ER/EW
Wavelength (nm) 850 1310 1550
Model FTB-85900 FTB-85901 FTB-85902
Tx level (dBm) –5.0 to –1.0 –6.0 to 0.5 –1.0 to 2.0
Rx level (dBm) –11.1 to 0.5 –12.6 to 0.5 –16.0 to –1.0
Maximum reach 300 m (OM3) 10 km 40 km
Tx bit rate (Gbit/s) 9.953/10.3125 9.953/10.3125 9.953/10.3125
Rx bit rate (Gbit/s) 9.953/10.3125 9.953/10.3125 9.953/10.3125
Tx wavelength range (nm) 840 to 860 1260 to 1355 1530 to 1565
Frequency offset generation (ppm) ±120 ±120 ±120
Rx wavelength range (nm) 840 to 860 1260 to 1600 1270 to 1600
Measurement accuracy (ppm) ±4.6 ±4.6 ±4.6
Rx damage level max. (dBm) 6 5 6
Jitter compliance IEEE 802.3ae IEEE 802.3ae IEEE 802.3ae
Laser type VCSEL DFB EML
Laser product Class 1 Class 1 Class 1
Connector LC LC LC