EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 17)

Safety Information
Power Blazer 5
Installation Instruction Warnings
Installation Instruction Warnings
C
AUTION
For IQS platforms,

this unit is for indoor use only.

keep all ventilation openings clear and unobstructed.
C
AUTION
When you use the unit outdoors, ensure that it is protected from
liquids, dust, direct sunlight, precipitation, and full wind pressure.
C
AUTION
Except for the Dual Bantam connector and the RJ-48C port, all
telecom (electrical) interfaces are SELV (Safety Extra Low Voltage)
circuitry intended for intra-building use only.
C
AUTION
For the Dual Bantam connector and the RJ-48C ports, use only No.
26 AWG or larger telecommunication line cord to reduce the risk of
fire.
C
AUTION
No user serviceable parts are contained inside. Contact the
manufacturer regarding service of this equipment.
I
MPORTANT
All wiring and installation must be in accordance with local building
and electrical codes acceptable to the authorities in the countries
where the equipment is installed and used.