EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 386)

Test Results
374 FTB/IQS-88000 Series
Summary (EtherSAM)

Test/Power Recovery: Test Recovery (Widows 8 or above) or
Power Recovery (Windows XP), when displayed, indicates that the
test has automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test/Power Recovery field.
Refer to Power Failure Recovery on page 521.

Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 328.

Service Configuration/Performance Test: Tap Service Configuration
Test or Service Performance Test button to view the result summary
of the corresponding test.

Service indicates the service’s number and name. For Service
Configuration Test, the number/name is highlighted in red per
service when VLAN mismatch occurred; in Dual Test Set or Dual
Port topology, the direction is also highlighted; in Dual Test Set, the
R -> L direction label is gray when VLAN Preservation is not
supported by the remote module.

Direction, available with Dual Test Set or Dual Port topology,
indicates respectively results from local to remote (L -> R) and
remote to local (R -> L), or P1 to P2 (P1->P2) and P2 to P1
(P2->P1).

Service Performance Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.

Service Configuration Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.