EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 196)

Test Setup - Test Configurator, Timer, and System
184 FTB/IQS-88000 Series
S-OAM and MPLS-TP OAM

Drop Eligible
12
is set to No (no frames will be dropped when
congestion occurs) and is not configurable.

Period determines the transmission period of the CCM frame: 3.33 ms,
10 ms, 100 ms (default), 1 s, 10 s, 1 min, or 10 min.
MPLS-TP Label Stack (G.8113.1)

MPLS-TP Mode
PW (Pseudo-Wire) (default) provides an emulation of a point-to-point
connection over a packet-switching network. The PW begins and ends
at the LER or PE (Provider Edge).
LSP (Label Switch Path) is a path through a MPLS network, it begins
and ends at LER or LSR.
Section is a segment between two adjacent LER/LSR.

Label 2 check box when selected enables the MPLS Label 2. The
Label 2 check box is configurable for PW and LSP (cleared by default)
and is forced cleared for Section.

Label 1 check box when selected enables the MPLS Label 1.
The Label 1 check box is forced selected for PW and LSP and forced
cleared for Section.

GAL check box when selected enables the Generic Associated
Channel Label. The GAL check box is forced selected for LSP and
Section and is configurable for PW (selected by default).

Label is configurable for Label 1 and Label 2: 16 to 1048575, default
is 16. Label is not configurable for GAL and is set to 13.

TC sets the Traffic Class: 0 (default) to 7.

TTL sets the Time To Live: 1 to 255, default is 128.