EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 211)

Test Setup - Test Configurator, Timer, and System
Power Blazer 199
Signal (Transport)
Signal (Transport)
From the Test menu, tap Setup, Test Configurator, the interface block,
and the Signal tab.
Physical Interface - Optical
Note: For electrical interface, see Physical Interface - Electrical on page 201.

Optical Lane, available with parallel interface, indicates the optical
lane number.

Laser
1
indicates the status of the laser: ON with the laser pictogram
(emitting an optical laser signal) or OFF.

TX Power (dBm)
1 indicates, when supported, the transmit power level
of the optical lane/laser in dBm.

Wavelength (nm)
1
indicates, when supported, the detected lane/laser
wavelength.
Optical Interface Optical Lane Number
OTU3 (4 Lanes) [43.018 Gbit/s]
OTU3e1 (4 Lanes) [44.571 Gbit/s]
OTU3e2 (4 Lanes) [44.583 Gbit/s]
OTU4 (4 Lanes) [111.81 Gbit/s] 0 through 3
OTU4 (10 Lanes) [111.81 Gbit/s] 0 through 9
1. Displayed for each optical lane for parallel interface