Hanna Instruments HI 83214 - Manual (Page 62)

62
PHOSPHORUS, TOTAL HIGH RANGE
Phosphorus, Total HR
SPECIFICATIONS
Range 0.0 to 32.6 mg/L (P)
Resolution 0.1 mg/L
Accuracy ±0.5 mg/L or ±5 % of reading @ 25 °C, whichever is greater
Light Source Tungsten lamp with narrow band interference filter @ 420 nm
Method Adaptation of the Standard Methods for the Examination of Water and Wastewater,
20 th edition, 4500-P C, vanadomolybdophosphoric acid method. A persulfate digestion
converts organic and condensed inorganic forms of phosphates to orthophosphate. Then
the reaction between orthophosphate and the reagents causes a yellow tint in the
sample.
REQUIRED REAGENTS
Code Description Q.ty/test Q.ty/set
HI 93758V-0HR* Reagent Vial 1 vial 50 vials
HI 93758C-0 NaOH Solution 1.54 N 2 mL 1 bottle
HI 93763B-0 Molybdovanadate Reagent 0.5 mL 1 bottle
DEIONIZED120 Deionized Water 5 mL 1 bottle
PERSULFATE/P Potassium Persulfate 1 packet 50 packets
* Reagent Vial identification: P THR, green label.
Note: Store the unused vials in their container in a cool and dark place.
REAGENT SET
HI 93763B-50 Reagents for up to 49 tests
For other accessories see page 68.
REQUIRED ACCESSORIES
HI 839800-01 Hanna reactor (115 VAC)
HI 839800-02 Hanna reactor (230 VAC)
HI 740216
test tube cooling rack (25 holes)
HI 740217 Laboratory bench safety shield
For other accessories see page 68.
MEASUREMENT PROCEDURE
Before using the reagent kit carefully read all the instructions and the Material Safety Data Sheet
(MSDS). Pay particular attention to all warnings, cautions and notes. Failure to do so may result
in serious injury to the operator.