Labconco RapidVap Vacuum, N2 and N2/48 Evaporation Systems 7910015 - Manual (Page 16)

12
Chapter 3: Getting Started
Product Service Domestic 1-800-522-7658, International 816-333-8811
Unpacking Your RapidVap
Carefully unpack your RapidVap and inspect it for
damage that may have occurred in transit. If your
RapidVap is damaged, notify the delivery carrier
immediately and retain the entire shipment intact for
inspection by the carrier.
DO NOT RETURN GOODS
WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO.
UNAUTHORIZED RETURNS WILL
NOT BE ACCEPTED.
IF YOUR RAPIDVAP WAS
DAMAGED IN TRANSIT, YOU
MUST FILE A CLAIM DIRECTLY
WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND
ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING
DAMAGES.
Do not discard the carton or packing material for your
RapidVap until you have checked all of the components
and installed and tested the RapidVap.
RapidVap Components
As previously mentioned, Labconco manufactures two
types of RapidVap, the Vacuum and the Nitrogen
models. Each model is available in 115V or 230V.
The different RapidVap models require different
assembly components. Locate the model of RapidVap
you received in the following tables. Verify that the
components listed are present and undamaged.
The United States
Interstate Commerce
Commission rules
require that claims be
filed with the delivery
carrier within fifteen (15)
days of delivery.
)
)