Labconco RapidVap Vacuum, N2 and N2/48 Evaporation Systems 7910015 - Manual (Page 24)

20
Chapter 3: Getting Started
Product Service Domestic 1-800-522-7658, International 816-333-8811
Solvents used in the RapidVap may be
flammable or hazardous. Use extreme
caution and keep sources of ignition
away from the solvents. When using
flammable or hazardous solvents,
both the RapidVap and the vacuum
pump should be operated inside a
fume hood.
If a sample is spilled in the chamber it
must immediately be cleaned up.
Hazardous materials such as strong
acids or bases, radioactive substances
and volatile organics, must be handled
carefully and promptly cleaned up if
spilled.
Several components of the RapidVap
which are located inside the chamber
are made of stainless steel which can
be attacked by acids. Use of acids
such as trifluoroacetic acid can result
in degradation of the product and the
vacuum pump if the vacuum system is
being used. Use care when using
aggressive liquids which can damage
the RapidVap and thoroughly clean
the RapidVap after each use. Contact
Labconco before evaporating acids.
WARNING: The disposal of
substances used in connection with
this equipment may be governed by
various Federal, State or local
regulations. All users of this
equipment are urged to become
familiar with any regulations that
apply in the user’s area concerning
the dumping of waste materials in or
upon water, land or air and to comply
with such regulations.
!