Laerdal SimMan Essential - Manual (Page 26)

26 27
System Setup
5 - INSTRUCTOR PATIENT MONITOR
<Instructor’s Patient Monitor> shows the current physiological state of the simulation.
In Instructor Mode only, the patient monitor waveforms and parameters can be set directly by selecting and clicking the individual
waveform or numeric parameter with the mouse pointer arrow.
6 - EYES
<Eyes> window is used to configure the state of the eyes of the patient during simulation.
The Eyes animation is a real-time representation of the eyes of the Manikin. For more information on configuring the eyes see section:
Clinical Features.
7 – AIRWAY / BREATHING
<Airway / breathing> tab shows the airway/breathing status of the patient, and is used to configure these settings. For more information
on configuring the airway and breathing, see section: Clinical Features.
8 – CIRCULATION & FLUIDS
Settings of <Circulation & fluids> tab are used to control the pulses from the Manikin during simulation.
If <Airway / breathing> is hidden, click on the tab name to access the window. For more information on configuring fluids see Clinical
Features
.
9 – SOUNDS
Settings of <Sounds> tab are used to control the body sounds and vocal sounds from the manikin.
To open <Sounds> menu, click on the tab name. For more information on configuring sound settings see Clinical Features.
10 – TECHNICAL STATUS
<Technical Status> window provides information about the technical status of the SimMan Essential manikin system, including battery
life, wireless connection signal strength, blood tank drainage, communication channels in use and video recording.
3G View and Classic View
There are two view options when running a simulation in Instructor Mode:
INSTRUCTOR MODE 3G VIEW INSTRUCTOR MODE CLASSIC VIEW
Classic view makes use of the Learner event libraries of previous SimMan versions; so that custom-made scenarios made with older
SimMan software can be used seamlessly with SimMan Essential. Therefore SimMan scenarios made before SimMan Essential will by
default display the Classic view after conversion.
Scenarios made for SimMan Essential will display the 3G view: Recommended for experienced users of older SimMan
versions: