Laerdal SimMan Essential - Manual (Page 32)

32 33
System Setup
1 - TOP MENU
1 - Press #wave in the top menu to view and
change monitor display settings.
Pressing the Alarm Volume icon on the top
menu line opens the <Alarm Volume> menu.
2 - Parameters readout area. The learner may also edit scaling,
alarm limits, etc using this interface. Clicking the parameter of
interest will present a menu with available options.
Some fields will only be available while appropriate sensors are
connected to the Manikin.
3 - BOTTOM MENUS
There are effectively two menus. Press the left
or right arrow key to toggle back and forth.
BOTTOM MENU 1 (IN ORDER FROM LEFT TO RIGHT):
Selecting the <Silence Alarm> button turns
active alarm sounds OFF.
Selecting the <Pause Alarms> button turns
all sound alarms off for 3 minutes.
The NBP Start begins inflation of the modified
SimMan Essential blood pressure cuff. NBP
details will register in the NBP section of the
monitor.
Zero Press button opens a submenu from
which you can select zeroing of the ABP, PAP
or CVP transducers.
Cardiac Output generates a new reading of
Cardiac Output. The C.O. details will be
shown in the C.O. part of the Patient Monitor
PC.
The Wedge button temporarily substitutes
the PAP wave and numbered parameters
with the WP wave and parameters. The
wedge curve switches back automatically
after 10-15sec.
The TOF (Train of Four) button generates a
ew reading of the TOF state of the patient.
The TOF details will be shown in the TOF part
of the Patient Monitor PC.
Selecting the <Graph Trends> button opens
the Graphical Trends window. By using the
menu buttons, you can review the history of
the available Trend parameters.
Selecting the 12-lead ECG button generates a
12-lead ECG strip. Select <Print> to have
this ECG strip printed on the default printer
available from your Patient Monitor computer.
BOTTOM MENU 2
Bottom menu buttons in order from left to right:
Selecting the <QRS Volume> button opens
the <QRS Volume> menu, shown below.
Select the desired volume (0-10).
Selecting the <Alarm Volume> button opens
the <Alarm Volume> menu, shown below.
Select the desired volume (0-10).
Select the <Radiology> button to open the
<Radiology> display. X-ray images which have
been included in the current scenario are
shown.
Select the <Media> button to open the
<Media> display. Select the <Close> button
to close the Media display.
Select the Labs button to open the Labs
display. Select the <Close> button to close
the <Labs> display.
Selecting the Main Setup button opens the
<Main Setup> menu. Options in the <Main
Setup> menu are identical to the similar
options displayed on the Menu line.
Selecting the <Main Screen> button enables
an immediate return to the <Main Screen>,
and cancels all submenus. Submenus can also
be closed by selecting the “X” box of the
submenu.