Connecting the blood pressure cuff, Connecting the spo, Probe – Laerdal SimMan Essential User Manual
Page 49: Simulation setup
49
Manikin Setup
System Setup
Sim
ulation Setup
Clinical F
eatur
es
Maintenance
Tr
oubleshooting
Spar
e Par
ts
Simulation Setup
Connecting the Blood Pressure Cuff
The manikin is delivered with a specially adjusted blood pressure cuff. Connect the tube to the white BP connector at the side of the
manikin before use.
CALIBRATING THE BLOOD PRESSURE CUFF
Connecting the SpO
2
Probe
The SpO
2
probe can be purchased separately.
The SimMan Essential SpO
2
probe is made up of a light diode and
light sensor. When the beam between the diode and sensor is broken,
the Patient Monitor Application registers that the SpO
2
probe is
connected.
1 Connect the probe’s USB plug to the Patient Monitor PC.
2 The probe can be placed on any suitable area on the manikin,
Ensure that the probe is always firmly fixed in position.