Rocktron MultiValve - Manual (Page 14)

11
The MultiValve provides 128 stored sounds called presets. Any of the 128 presets can
be called up at any time via the front panel PRESET control (used to both select and recall
a preset).
The root of each preset’s sound is its configuration. The MultiValve provides two main
effect configurations—the Classic configuration and the Rotary configuration. Each configu-
ration provides a different selection of available effects.
Classic configuration provides these effects:
• HUSH ® • Reverb • Delay
• Parametric EQ • Compression • Phaser
• Flanger • Tremolo • Pitch Shift
• Chorus • Auto Pan • Speaker Simulator
Rotary configuration provides these effects:
• HUSH ® • Reverb • Delay
• Parametric EQ • Compression
• Rotary Speaker • Speaker Simulator
Any of the effects provided within a particular configuration may be switched in or
out for each preset.
Tube Mode
In addition to the above effects, the signal path can also be routed through a 12AX7
tube to add a warm, vintage sound to your effects. Two levels of tube gain are provided.
The block diagrams on pages 12 and 13 illustrate the basic signal path for each
configuration.
6. Operating Format