To reload user data from a sequencer – Rocktron MultiValve User Manual
Page 61
Advertising
58
To reload user data from a sequencer
Operating the MultiValve
Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
MIDI IN on the receiving MultiValve.
Step 1
IMPORTANT:
Do not allow a looping connection from the MIDI OUT/THRU of the receiving
MultiValve back to the MIDI IN of the transmitting sequencer.
Turn the FUNCTION SELECT controls on both the receiving MultiValve until "MIDI
DUMP/LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING MULTIVALVE
Turn the PARAMETER SELECT controls on the receiving MultiValve until "BULK DUMP/
LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING MULTIVALVE
Step 3
Step 2
Advertising