Rocktron MultiValve - Manual (Page 4)

1
1. Introduction
Congratulations on your purchase of the Rocktron MultiValve ™ guitar effects proces-
sor! The MultiValve ™ is a 24-bit DSP processor providing tube warmth to a host of high
quality digital effects, as well as a number of practical features to enhance any guitar rig.
• Audio Glassics 12AX7 tube, which can be inserted into the signal path
on any preset, with 2 gain settings for added tube warmth.
• Preset Spillover allows for reverb and delays from a current preset to
carry over into the next preset and continue decaying when a new preset
has been selected.
• Dual Channel Switching allows for programmable channel switching of
amp heads, combo amps or preamps and eliminates the need for a
separate channel switching device.
• Real Time Control of delay times and modulation rates through tap
tempo and rate parameters. Delay times and modulation rates can be
changed instantly by tapping either a momentary footswitch or the front
panel Tap Delay/Rate parameter.
• High quality digital effects include chorus, delay, auto pan, tremolo,
rotating speaker, pitch shift, flanger, reverb and phaser effects.
• HUSH ® noise reduction operates only on incoming preamp noise, and
does not affect the digital effects - which are already ultra quiet.
• Also provides compression, a four band full parameteric EQ and
complete mixing capabilities.
For a thorough explanation of the MultiValve ™ and all its features, please read this
manual carefully and keep it for future reference. After removing the MultiValve ™ from the
box, save all the packing materials in case it becomes necessary to ship the unit.