Midi channels – Rocktron MultiValve User Manual
Page 55
52
MIDI Channels
The MultiValve can receive MIDI commands from other MIDI transmitting devices, as well as transmit MIDI
program changes to other MIDI-based equipment when a preset is recalled on the MultiValve. The MIDI Channels
function allows you to select the MIDI channels that the MultiValve will receive and transmit MIDI information on.
Step 1
Turn the FUNCTION SELECT control clockwise until the MultiValve displays "MIDI
CHANNELS".
MIDI CHANNELS
Step 2
Turn the PARAMETER SELECT control one step clockwise to display the current MIDI
Receive channel.
RECEV CHANL
1
Step 3
Turn the PARAMETER ADJUST control to select the desired MIDI channel. You may
select channels 1-16, OMNI (all channels) or OFF (will not receive MIDI commands).
RECEV CHANL OMNI
Step 4
Press the STORE button to save the new MIDI Receive channel. "STORED" will flash
briefly on the display.
STORED
Operating the MultiValve
3,6
4,7
2,5
1
Step 5
Turn the PARAMETER SELECT control one step further to access the MIDI Transmit
Channel status.
TRANS CHANL OFF