Rocktron MultiValve User Manual
Page 64
61
Operating the MultiValve
Step 5
Press the STORE button to begin restoring the selected preset into the selected location.
After the process is completed, the display should read "ERRORS 0". This represents the
number of bytes that the MultiValve found did not initialize properly. Any number of errors
other than "0" means that the MultiValve may not have initialized properly and the process
should be repeated.
!! CAUTION !!
Pressing the STORE button at this time will overwrite
the current preset with the displayed factory preset.
ERRORS 0
The MultiValve will remain in this condition until the FUNCTION SELECT control is turned to
exit the Factory Restore function. The preset currently recalled will be the preset most recently
restored into the current location.