Rocktron MultiValve - Manual (Page 57)

54
MIDI Dump/Load
Any or all of the MultiValve presets may be dumped to a sequencer or another MultiValve via system exclusive
messages. The information exchanged when performing a MIDI Dump consists of parameter values, title characters
and controller assignment information. When dumping a single preset into another MultiValve, the dumped preset
may be loaded into any preset location on the receiving MultiValve.
To dump a single MultiValve preset into another MultiValve
Operating the MultiValve
Connect a standard MIDI cable from the MIDI OUT of the transmitting MultiValve to the
MIDI IN on the receiving MultiValve. Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving
MultiValve back to the MIDI IN of the transmitting MultiValve.
Step 2 Turn the FUNCTION SELECT controls on both the transmitting and receiving MultiValves
until "MIDI DUMP/LOAD" is displayed on each.
MIDI DUMP/LOAD MIDI DUMP/LOAD
Step 3 Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".
1 PR DUMP/LOAD 1 PR DUMP/LOAD
RECEIVING MULTIVALVE
RECEIVING MULTIVALVE
TRANSMITTING MULTIVALVE
TRANSMITTING MULTIVALVE