Stop – Rocktron MultiValve User Manual
Page 60
57
Operating the MultiValve
Step 5
Press the STORE button on the MultiValve to initiate the data dump. As the MultiValve
performs the dump, it will display "XXX DUMPED" - where "XXX" = the number of the data
string currently transmitting (i.e. strings 1-254 are presets, titles, controller information and 2-
tap delay information; string 255 contains program mapping information; and string 256
contains miscellaneous information. Contact Rocktron Corporation for information on how to
receive a detailed MIDI spec).
XXX DUMPED
TRANSMITTING MULTIVALVE
Step 6
After the MultiValve displays "TRANS COMPLETE", stop the sequencer. The sequencer should
have recorded all of the data that was dumped from the MultiValve. Keep this data stored on a
disk in a safe place. Turn the PARAMETER SELECT control to continue.
STOP