Rocktron MultiValve - Manual (Page 73)

70
Step 1
Selecting a Configuration
Turn the FUNCTION SELECT control fully clockwise to "CONFIG SELECT".
The MultiValve allows you to select which configuration— Classic or Rotary—is active for the current preset.
CONFIG SELECT
Operating the MultiValve
Step 2 Turn the PARAMETER SELECT control to access the "XXXXXXX SELECTED" param-
eter.
Step 3 Turn the PARAMETER ADJUST control to select the desired configuration.
ROTARY SELECTED
Step 4 Press the STORE button to save the selected configuration. "STORED" will flash briefly on
the MultiValve display.
STORED
CLASSIC SELECTED
4 3 1 2