Vortech Universal GM LSX Tuner Kits - Manual (Page 2)

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
ii
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires gener-
al automotive mechanic knowledge and experience. Please
browse through each step of this instruction manual prior to
beginning the installation to determine if you should refer the
job to a professional installer/technician. Please contact your
dealer or Vortech Engineering for possible installers in your
area.
2. This product was designed for use on stock (un-modified, OEM) vehicles. The
PCM (computer), engine, transmission, drive axle ratios and tire O.D. must be
stock. If the vehicle or engine has been modified in any way, check with Vortech
prior to installation and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard use
(no boost) until the problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage.
Exclusions from Vortech warranty coverage considerations include,
but not limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but not
limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM
programming or other such changes.
©2010 VORTECH ENGINEERING, LLC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated
into another language in any form, by any means without written permission of Vortech Engineering, LLC.
STOP
T
his manual provides information on the installation, maintenance and service
of the Vortech supercharger kit expressly designed for this vehicle. All infor-
mation, illustrations and specifications contained herein are based on the lat-
est product information available at the time of this publication. Changes to the man-
ual may be made at any time without notice. Contact Vortech Engineering for any
additional information regarding this kit and any of these modifications at (805) 247-
0226 8:00am-4:30pm PST.