Vortech Universal GM LSX Tuner Kits - Manual (Page 22)

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12
1. Disconnect the charging wire and plug locat-
ed on the back side of the alternator.
Remove alternator and alternator bracket
(the factory mounting stud must be removed
to allow removal of alternator).
See Fig 3A, 3B.
2. Remove oil galley plug located next to the
timing chain cover on the front driver side of
the engine block. Set aside plug, as it will not
be reused. See Fig 3C.
3. OIL FEED INSTALLATION
(ENGINE OIL-FED UNITS ONLY)
Fig 3A
Fig 3B
Fig 3C