Vortech Universal GM LSX Tuner Kits - Manual (Page 20)

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
10
COG DRIVE SYSTEMS
(SERPENTINE DRIVE INSTALLATIONS SKIP
STEP 2.N. BELOW)
N. Assemble the supplied crank pulley spacer
and 50mm Cog drive pulley onto the front of
the newly installed damper. See Figure 2P.
i. Secure the pulley and spacer to the
dampner using the three supplied 3/8-16
X 3.25" screws with washers. The 3.25"
long screws will pass through the entire
assembly and thread into the A/C pulley.
ii. Thread the previously removed 3/8-16 X
2.5" 12-pt screws with washers through
the CRANK pulley and spacer and into
the damper hub.
iii. Tighten all hardware evenly, using a pro-
gressive, criss-cross pattern. Torque fas-
teners to 35 ft/lb.
Fig 2P