Vortech Universal GM LSX Tuner Kits - Manual (Page 25)

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
15
A. Locate the 4GE110-044 supercharger mount-
ing bracket assembly.
B. Install the supplied M10-1.5 x 90mm button
head screw into the upper alternator screw
location from which the OEM screw was pre-
viously removed. See Fig. 5A.
C. Make sure that the front face of the driver
side cylinder head is clean and smooth.
Mount the cylinder head plate to this face
using four (4) M10 x 30mm screws and
washers in the locations shown in Fig. 5B.
Route the nearby wiring harness behind the
plate, creating extra slack to the extent pos-
sible, taking care not to excessively pinch or
deform it. Tighten the screws.
Fig 5A
Fig 5B
5. MOUNTING BRACKET AND
SUPERCHARGER INSTALLATION
M10 X 90MM
BUTTON HEAD
M10X30MM