Using the timer and stopwatch, Using the timer, Using the stopwatch – Fitbit Surge User Manual
Page 16
11
NOTE: A maximum of 35 hours of GPS data can be stored on your Surge. If you try to
track more than 35 hours’ worth of GPS data without syncing, older data will
be deleted to make room for new data. To ensure that all your GPS data is
saved on fitbit.com, sync your Surge regularly.
Using the timer and stopwatch
You can use your Surge both as timer and a stopwatch.
Using the timer
You can use the timer function on your Surge to set a timer of up to 90 minutes.
To use the timer:
1.
Show the Menu on your Surge, then swipe to Timer.
2.
Press the Select button or tap the screen to show the timer.
3.
Tap the gear icon or press the Action button to set the timer.
4.
Select the minutes and seconds of the timer duration, then tap the check mark
icon or press the Select button to set the timer.
5.
To begin the timer, tap the play icon or press the Select button.
6.
To pause or stop the timer, tap the pause icon or press the Select button
again.
Using the stopwatch
You can use the stopwatch function on your Surge to measure how long it takes you
to complete an activity or exercise.
To use the stopwatch:
1.
Show the Menu on your Surge, then swipe to Timer.