TOYOTA 2011 Tundra - Manual (Page 582)

561
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Remove the filter cover.
Pull the filter out of the filter
outlet.
n Cleaning method
If the filter is dirty, clean by
blowing compressed air
through the filter from the
downward side.
Hold the air gun 2 in. (5 cm)
from the filter and blow for
approximately 2 minutes at
72 psi (500 kPa, 5.0 kgf/cm
2
or bar).
If it is not available, have
the filter cleaned by your
Toyota dealer.