TOYOTA 2011 Tundra - Manual (Page 75)

50
1-2. Opening, closing and locking the doors
n The following functions can be set or cancelled:
n Setting and canceling the functions
Vehicles with multi-information display
→P. 205
Vehicles without multi-information display
To switch between setting and canceling, contact your Toyota
dealer.
Function Operation
Shift position linked
door locking function Shifting the shift lever out of P locks all
doors.
Shift position linked
door unlocking function
Shifting the shift lever to P unlocks all doors.
Speed linked door lock-
ing function
All doors are locked when the vehicle speed
is approximately 12 mph (20 km/h) or
higher.
Driver’s door linked
door unlocking function
All doors are unlocked when the driver’s
door is opened within 10 seconds after turn-
ing the engine switch to the ACC or LOCK
position.
n When locking the doors using the key (vehicles with power door lock
system)
The door cannot be locked if the key is in the engine switch.
n Key reminder buzzer
A buzzer sounds if the driver’s door is opened, while the engine switch is in
the ACC or LOCK position to remind you to remove the key.
n Customization that can be configured at Toyota dealer
Settings (e.g. door lock) can be changed. (Customizable features →P. 683)